Canon i-SENSYS MF229dw Service Manual page 281

■ SPLMAN
COPIER > FUNCTION > SPLMAN
Sub item Description
TOP-MPT Adjustment of leading edge margin when feeding from MP tray.
Adjustment in: 0.1mm
Setting range: 50 ~ 150 (Default value: 100)
TOP-DUP-MPT Adjustment of leading edge margin on both sides/ back side
when feeding from MP tray.
Adjustment in: 0.1mm
Setting range: 50 ~ 150 (Default value: 100)
LEFT-MPT Adjustment of left margin when feeding from MP tray.
Adjustment in: 0.1mm
Setting range: 50 ~ 150 (Default value: 91)
LEFT-DUP-MPT Adjustment of left margin on both sides/ back side when
feeding from MP tray.
Adjustment in: 0.1mm
Setting range: 50 ~ 150 (Default value: 92)
TOP-CST Adjustment of leading edge margin when feeding from
cassette.
Adjustment in: 0.1mm
Setting range: 50 ~ 150 (Default value: 100)
TOP-DUP-CST Adjustment of leading edge margin on both sides/ back side
when feeding from cassette.
Adjustment in: 0.1mm
Setting range: 50 ~ 150 (Default value: 100)
LEFT-CST Adjustment of left margin when feeding from cassette.
Adjustment in: 0.1mm
Setting range: 50 ~ 150 (Default value: 91)
LEFT-DUP-CST Adjustment of left margin on both sides/ back side when
feeding from cassette.
Adjustment in: 0.1mm
Setting range: 50 ~ 150 (Default value: 92)
8
Service Mode > COPIER > OPTION > ACC
Simplex Duplex
Model Model
Yes Yes
No Yes
Yes Yes
No Yes
Yes Yes
No Yes
Yes Yes
No Yes
T-8-15
8 Service Mode > COPIER > OPTION > ACC
OPTION
■ BODY
COPIER > OPTION > BODY
Sub item Description
LOCALE To set country group.
1: Japan
2: North America
3: Korea
4: China
5: Taiwan
6: Europe
7: Asia
8: Oceania
Setting range: 1 - 8 (Default value: Factory default)
Execute the following service mode to enable this setting.
COPIER > FUNCTION > CLEAR > ALL
ASLPMAX To change the maximum value of the auto sleep time.
Setting range: 30 or 240 (Default value: 30)
■ ACC
COPIER > OPTION > ACC
Sub item Description
WLAN Shows whether the Wireless LAN function is ON/OFF.
0: Forcibly turned OFF (The function is disabled even if the
wireless LAN is installed.)
1: ON (default value)
WLANMODE Shows whether the Wireless LAN IEEE 802.11n standard is
enabled/disabled.
0: Disabled
1: Enabled (Default value)
WLANSERIAL Use this setting to use the serial interface exclusively for the
WiFi function. Use this setting to take various measurement of
Wireless LAN.
0: Normal mode(Default value)
1: Measurement mode
8-8
ADF Other
model
Yes Yes
Yes Yes
T-8-16
Common to
all models
Yes
Yes
Yes
T-8-17
8-8