Canon i-SENSYS MF229dw Service Manual page 204

4
Disassembly/Assembly > Pickup Feed System (Duplex Model) > Removing the Duplex Solenoid (Duplex Model) > Procedure
2) Free the Solenoid Harness [1] from the guide [A], and pass it through the hole [B] of the
Right Plate to the outside.
• 1 Connector [2]
[2] [1]
1x
[A]
[B]
1x
3) Remove the Duplex Solenoid [1].
• 1 Screw [2]
[1]
1x
4 Disassembly/Assembly > Pickup Feed System (Duplex Model) > Removing the Duplex Solenoid (Duplex Model) > Procedure
[B] [1]
F-4-411
[2]
F-4-412
NOTE: How to assemble the Duplex Solenoid
Be sure to align the Solenoid Lever [1] with the groove [2] of the link, and fit the 2
Solenoid Positioning Bosses [3] in the 2 positioning holes [4] of the Side Plate.
[2]
[4]
4-142
[1] [3]
[3]
F-4-413
4-142