Removing The Toner Sensor And Multi Pickup Sensor Unit (Fax Model + Simplex Model) - Canon i-SENSYS MF229dw Service Manual

4
Disassembly/Assembly > Controller System (Simplex Model) > Removing the Toner Sensor and Multi Pickup Sensor Unit (Fax Model + Simplex Model) > Preparation
NOTE:
The following shows how to route the harness.
4 Disassembly/Assembly > Controller System (Simplex Model) > Removing the Toner Sensor and Multi Pickup Sensor Unit (Fax Model + Simplex Model) > Preparation
Removing the Toner Sensor and Multi Pickup Sensor
Unit (Fax Model + Simplex Model)
■ Preparation
1) Remove the Left Cover (Simplex Model) (Refer to page 4-144).
2-1) Remove the SADF Unit + Reader Unit (SADF Model) (Refer to page 4-51).
2-2) Remove the Copyboard Cover + Reader Unit (Copyboard Model) (Refer to page 4-76).
3) Remove the Right Cover (Simplex Model) (Refer to page 4-147).
4) Remove the Front Cover Unit (Simplex Model) (Refer to page 4-147).
5) Remove the Upper Cover (Simplex Model) (Refer to page 4-147).
F-4-490
4-167
F-4-491
4-167