Removing The Duplex Solenoid (Duplex Model) - Canon i-SENSYS MF229dw Service Manual

4
Disassembly/Assembly > Pickup Feed System (Duplex Model) > Removing the Duplex Solenoid (Duplex Model) > Procedure

Removing the Duplex Solenoid (Duplex Model)

■ Preparation
1) Remove the Left Cover (Duplex Model) (Refer to page 4-86).
2-1) Remove the DADF Unit + Reader Unit (DADF Model) (Refer to page 4-27).
2-2) Remove the SADF Unit + Reader Unit (SADF Model) (Refer to page 4-51).
2-3) Remove the Copyboard Cover + Reader Unit (Copyboard Model) (Refer to page 4-76).
3) Remove the Right Cover (Duplex Model) (Refer to page 4-87).
4) Remove the Front Cover Unit (Duplex Model) (Refer to page 4-89).
5) Remove the Upper Cover Unit (Duplex Model) (Refer to page 4-89).
■ Procedure
1) Remove the Scanner Cover [1].
• 2 Screws (black TP) [2]
2x
4 Disassembly/Assembly > Pickup Feed System (Duplex Model) > Removing the Duplex Solenoid (Duplex Model) > Procedure
F-4-407
[2]
[1]
F-4-408
NOTE: How to assemble the Scanner Cover
1) Be sure to pass the Shutter Open/Close Lever [3] through the hole [A] of the Scanner
Cover.
2) Be sure that the Shutter Open/Close Lever [3] can move vertically.
4-141
[A]
[3]
F-4-409
[3]
F-4-410
4-141