Removing The Printer Controller Pcb; Removing The Ncu Pcb (If Equipped With Fax Functions) - Canon SmartBase 1270D Service Manual

2.2.5 Removing the Printer Controller PCB

1) Remove the rear cover. (See 2.1.1.1)
2) Disconnect the connector [1].
3) Remove the 5 screws [2], and detach the
printer controller PCB [3].

2.2.6 Removing the NCU PCB (if equipped with fax functions)

1) Remove the rear cover. (See 2.1.1.1)
2) Disconnect all connectors form the NCU
PCB.
3) Remove the 4 screws [2], and detach the
NCU PCB [1].
COPYRIGHT © 2002 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1210D/1230D/1270D REV. 1 MAR. 2002
CHAPTER 5 MECHANICAL SYSTEM
[2]
[1] [2]
F05-202-17
[2]
[2]
F05-202-18
[3]
[1]
5-25