4
Parts Replacement and Cleaning > PCB > Removing the Shutter Motor (M8) > Replacement Procedure
Removing the Duplex Feed Motor (M4)
■ Replacement Procedure
1) Remove the rear cover
(right).("Removing the Rear Cover (Right)"(page
2) Remove the rear cover
(left).("Removing the Rear Cover (Left)"(page
3) Remove the right cover (upper
rear).("Removing the Rear Right Cover (Upper)"(page
4-22).)
4) Remove the HVT
PCB.("Removing the HVT PCB"(page
5) Remove the duplex feed motor.
- 1 connector
- 4 screws
x1
x2
4
Parts Replacement and Cleaning > PCB > Removing the Shutter Motor (M8) > Replacement Procedure
4-21).)
4-22).)
4-45).)
F-4-114
Removing the Shutter Motor (M8)
■ Replacement Procedure
1) Remove the fixing
assembly.("Removing the Fixing Unit"(page
2) Remove the drum
unit.("Removing the Drum Unit"(page
3) Remove the cartridge right rail unit.
- 2 screws (front side:1, right side:1)
x1
x1
4-51
4-41).)
4-38).)
F-4-115
F-4-116
4-51