Seismic Requirements - GE Discovery NM/CT 670 Instructions Manual

Equipment Description and General Construction Requirements

2.4 Seismic Requirements

IMPORTANT
For special seismic kit details and information please see the specific ITF released for the system seismic install.

At the time of this manual release only D670 with Brightspeed CT is seismic approved.

Seismic requirements are determined and specified by the hospital design professional of record
and must be approved by the specific state or country agency. Seismic attachment hardware shown
on seismic calculations may differ from hardware supplied with system. Any additional hardware
that is required will be the responsibility of the institution and/or their contractor.
For additional center of gravity information, see
Discovery NM/CT 670 – Standard Integration Instructions
5483063-1EN, Rev.2, ©2015 GE Healthcare
Table 2-5, p.2-47.
2-46
2.4 Seismic Requirements