GE Discovery NM/CT 670 Instructions Manual page 58

Equipment Description and General Construction Requirements
Defines the minimum area

required to enable installation,
operation and service of the
system in safe conditions.
Does not take into account

local requirements. If local
requirements are stricter, they
should be followed (see
App.D, Regulatory Clearances).
Operator movement around

the system is limited.
Cannot use table extender.

Does not take into account

space for the following:
Operator room

Collimator carts

Optional UPS

No option for permanent

objects around the CT (for
example: wall ducts, sink,
cabinet.)
Requires Small Room

CT Gantry Installation Dolly
during installation.
Figure 2-9: D670/OPT Reduced Serviceability Configuration Room Layout
Discovery NM/CT 670 – Standard Integration Instructions
5483063-1EN, Rev.2, ©2015 GE Healthcare 2-15
2.2 Room Size, Layout and Considerations
2.2.2 System Layout Drawings
Note:
Dimensions are in mm (")