GE Discovery NM/CT 670 Instructions Manual page 118

Electrical Requirements
Table 5-5: D670 Sub-system Inter-connection Cables(Continued)
Start / Destination
From To
Console
Injector
(adaptor box)
ECG CT gantry
NM gantry CT gantry
NM gantry CT gantry
NM gantry CT gantry
NM gantry Patient table
†
NM gantry
PIDB
MDP PIDB
NM gantry NM host
NM gantry NM host
* Actual length is the entire cable length, connector to connector, including cable run inside each sub-system.
Usable Length is the portion of the cable routed externally between sub-systems.
† The MDP can be the A1 or other primary power disconnect device
‡ The standard table cable provided is 20 M. There is an optional 10 M cable available.
Discovery NM/CT 670 – Standard Integration Instructions
5483063-1EN, Rev.2, ©2015 GE Healthcare
H/V
Run
(Usable Length)
Separation
#
(Y or N)
Feet
Y 8.2
N 30
N 126 29.5
N 124 29.5
N 125 29.5
N 130 65.6 (62.3)
Y 120 65.6 (54.1)
Y 9
N 128 65.6 (54.1)
N 127 65.6 (54.1)
Actual Length
*
Meters
2.5 Power cable injector to console
9.1 Gantry to ECG monitor
9 CT table interface cable
9 NM-CT gantry interface cable
9 ECG and respiratory gating cable
20 (19)
Table cable harness
20 (16.5) NM mains cable
2.5 PIDB-to-MDP power feed
20 (16.5) NM gantry to Host Ethernet cable
20 (16.5) NM gantry to Host persistence cable
5-13
5.5 System Cable Information
Description
‡