GE Discovery NM/CT 670 Instructions Manual page 67

Equipment Description and General Construction Requirements
Safety zone considerations:

The safety zone is designated by tape on the floor, usually
yellow (can also be differentiated by a change in floor
coloring). This designates the area that must be free of
obstructions to avoid a collision during an automatic motion.
Operation-related considerations:

Enable access for hospital beds, including maneuvering

and positioning the bed and moving the front of the
patient table during collimator exchange.
Storage of the collimator carts (one for each set of

collimators) when not in use
ECG Trigger Monitor and Contrast Injector – cable

position and lengths and storage when not in use
Space for storage and usage of ECG Trigger Monitor and Contrast Injector

Installation and service considerations:

Location of power connections

Access to communication lines (Ethernet, external hardcopy device)

Floor loading capacity and weight of system components, including storage and path of collimator carts

Service clearance areas (see

Storage cabinet for storage of service tools (optional). Depending on the room layout, it is

recommended that sufficient area is allocated for the cabinet.
Discovery NM/CT 670 – Standard Integration Instructions
5483063-1EN, Rev.2, ©2015 GE Healthcare
App.D, Regulatory Clearances)
2-24
2.2 Room Size, Layout and Considerations
2.2.4 Layout Considerations
Detector Pallet
motion area motion area