Revision History - GE Discovery NM/CT 670 Instructions Manual

Revision History

Direction + Date
Revision
5483063_r2 April 2015
Discovery NM/CT 670 – Standard Integration Instructions
5483063-1EN, Rev.2, ©2015 GE Healthcare
Description of Changes
Updated to include Discovery NM/CT 670 ES in configurations with Optima CT scanners

(items indicated by D670/OPT) –see
Addition of IMPORTANT note to

Update of UPS specifications in:

Table 1-1: D670 Components and Clearance — Metric, p.1-10
Components and Clearance — Imperial, p.1-13
Removal of CT Console table diagram from Chapter 1

New room layout Figure 2-9: D670/OPT Reduced Serviceability Configuration Room

Layout, p.2-15 & Section 2.2.2.1 on page 16
Update of Figure 2-10: Minimal Room Layout, p.2-17

Update of Figure 2-11: Recommended Layout, p.2-18

Update of UPS specifications in

Update of Table 2-3, D670 Drilling and Anchor Chart, p.2-36

Update of Figure 2-21: Patient Table Pivot Floor-Plate Anchoring Holes, p.2-38

Update of 2.4 Seismic Requirements, p.2-46

Anchoring Points, p.2-47
Addition of UPS to Table 4-2, D670 Heat Output in Scan Room, p.4-5

Update of Figure 5-3: MDP (A1) Connected to Power Input Distribution Box (PIDB) –

Configuration Options, p.5-14
page xxii
1.3.1.2 Detector Head Precautions, p.1-6
Table 2-2, Weight of Components, p.2-28
and Table 2-5, Subsystem Centers of Gravity and
ii
Chapter/
Pages
and Table 1-3: D670