Appendix B: Measuring Floor Flatness; Required Tools - GE Discovery NM/CT 670 Instructions Manual

Appendix B: Measuring Floor Flatness

The floor must meet strict flatness specifications. The information in this appendix is provided as
a tool for accurate measurement of the floor flatness.

Required Tools

Self-leveling fan beam laser tool (self-leveling for at least 3 degrees)

Masking tape

Chalk line

1 m (3') level with minimum 1 mm (1/16") gradations (alternatively, use a tape measure

securely taped to a spirit level)
Discovery NM/CT 670 – Standard Integration Instructions
5483063-1EN, Rev.2, ©2015 GE Healthcare B-1
-