GE Discovery NM/CT 670 Instructions Manual page 60

Equipment Description and General Construction Requirements
Defines the minimum area

required to enable
installation, operation and
service of the system in safe
conditions.
Does not take into account

local requirements.
Operator movement round

the system is limited.
Cannot use table extender.

The operator room is not

taken into account in the
room dimensions.
Space must be allocated

for the operator room. The
location can differ.
Figure 2-10: Minimal Room Layout
Discovery NM/CT 670 – Standard Integration Instructions
5483063-1EN, Rev.2, ©2015 GE Healthcare 2-17
2.2 Room Size, Layout and Considerations
2.2.2 System Layout Drawings
Note:
Dimensions are in mm