Siemens sinumerik 840d sl Configuration Manual page 67

Procedure
To create a non-integrated connection, follow these steps:
1. In the project tree, navigate to the device to be configured.
2. Double-click "Connections" in the project tree below the device, for example, "PC-
System_1 > HMI_RT_1 > Connections".
The editor for connections opens.
3. Double-click "<Add>" in the "Name" column and assign a meaningful name, for example,
"Connection NC".
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014
Configuring connections
5.3 Configuring a non-integrated connection
67