Siemens sinumerik 840d sl Configuration Manual page 138

Configure the language settings
10.3 Configuring language selection (PC systems)
Procedure
To switch to the language of WinCC RT Advanced Runtime based on the language set in
SINUMERIK Operate, follow these steps:
1. Double-click "Show all tags" in the "PC System_1 > HMI_RT_1 > HMI tags" folder of the
project tree.
2. Create a new HMI tag with the following values:
3. To create a new script, double-click "Add new VB function" in the "PC System_1 >
HMI_RT_1 > Scripts > VB scripts" folder.
4. In the Inspector window under "Properties > General", select "Sub" as the type and
assign a name (in the example "LangFromOperate").
138
Column
Name
Tag table
Connection
Data type
Address
Value
Can be freely selected (in the example below:
"DB10DBB96")
Default tag table
PLC
Byte
%DB10.DBB96
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014