Siemens sinumerik 840d sl Configuration Manual page 4

Preface
SINUMERIK
You can find information on SINUMERIK under the following link:
www.siemens.com/sinumerik
Target group
This publication is aimed at planning and application engineers.
Benefits
The Configuration Manual enables the target group to apply the rules and guidelines to be
observed when configuring products and systems. It helps you select products and
functions.
The Configuration Manual helps the target group to create a system or plant configuration.
Standard scope
This documentation only describes the functionality of the standard version. Additions or
revisions made by the machine tool manufacturer are documented by the machine tool
manufacturer.
Other functions not described in this documentation might be executable in the control. This
does not, however, represent an obligation to supply such functions with a new control or
when servicing.
For the sake of simplicity, this documentation does not contain all detailed information about
all types of the product and cannot cover every conceivable case of installation, operation, or
maintenance.
Technical Support
You will find telephone numbers for other countries for technical support in the Internet under
http://www.siemens.com/automation/service&support
EC Declaration of Conformity
The EC Declaration of Conformity for the EMC Directive can be found on the Internet at:
http://support.automation.siemens.com/WW/view/de/10805517/134200
4
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014