Siemens sinumerik 840d sl Configuration Manual page 29

3. Make the following settings in the "Access Path" tab:
4. Click "OK" to confirm your settings.
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014
Element
Access Point of the on the basis of
these state machines
Interface Parameter Assignment
Used
2.3 Configuring the PG/PC interface (PC systems)
Setting
S7ONLINE (STEP 7)
When you select an object in the list, a brief description is
displayed below the list.
Select the network adapter including interface parameter
assignment (TCP/IP) for the plant network of your
SIEMENS PC system from the list.
(For PCU 50.5: Intel(R) 82574L 190 Gigabit Network Con-
nection with TCP/IP).
Installation
29