Siemens sinumerik 840d sl Configuration Manual page 95

Note
Data consistency between the TIA Portal and SINUMERIK Operate
If you make changes to the data in SINUMERIK Operate after the import, these changes will
not automatically be synchronized between the systems.
Repeat the import process if you change something in the DB2 alarm texts in SINUMERIK
Operate.
Note
DB2 alarms not compatible with libraries
DB2 alarms are not compatible with libraries and are not stored in a library when you copy a
configuration.
Additional information
Information on "FC 10: AL_MSG error and operating messages" are listed in the
SINUMERIK 840D sl/828D Basic Functions Function Manual in "P3: PLC basic program for
SINUMERIK 840D sl".
Information on the configuration and operation of alarms in SINUMERIK Operate can be
found in the SINUMERIK Operate Commissioning Manual (IM9) under "Configuring alarms".
General information on configuring alarms/messages in WinCC can be found in the
information system, Section "Visualizing processes > Working with alarms".
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014
Configuring alarms
7.3 Configuring DB2 alarms
95