You can now configure the "Alarm view" control in the screen.
Make the following settings so that the imported alarms can be displayed during runtime.
● Runtime settings (Page 104)
● Settings of the respective alarm view (Page 105)
See also
SINUMERIK Integrate Access MyMachine /P2P in the SIEMENS Industry Mall
(https://ebstage.automation.siemens.com/mall/en/us/Catalog/Products/10166235)
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014
Configuring alarms
7.3 Configuring DB2 alarms
103