Siemens sinumerik 840d sl Configuration Manual page 122

Configuring PI services of the NC as system functions
9.2 Functions for the "NC part program" display object
Functions available for the "NC part program" display object
The following functions influence the "NC part program" display object:
Table 9- 1
Function
ScreenObjectCursorDown
ScreenObjectCursorUp
ScreenObjectPageDown
ScreenObjectPageUp
PartProgramListDirDown
PartProgramListDirUp
PartProgramListRefresh
PartProgramListSelectNCPartProgram
122
Functions for the NC part program display object
Meaning
Performs the <down> key function on the the
specified display object.
Performs the <up> key function on the the speci-
fied display object.
Performs the <page down> key function on the
the specified display object.
Performs the <page up> key function on the the
specified display object.
Navigate and select in the list directory.
Navigate and select in the list directory.
Update directories in the list box
Open the selected part program for editing on the
NC.
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014