Operation Of Lmv37.4 Via The Azl2; Normal Display; Display In Standby Mode; Display During Startup / Shutdown - Siemens LMV37.4 Series Basic Documentation

23

Operation of LMV37.4 via the AZL2

23.1 Normal display

23.1.1 Display in standby mode

P

23.1.2 Display during startup / shutdown

23.1.2.1. Display of program phases

P

23.1.2.2. Display of program phase with remaining running time until end of the phase is reached

P
168/267
Building Technologies
Normal display is the standard display in normal operation, representing the highest
menu level. From the normal display, you can change to the info, service or parameter
level.
V h min s %

V h min s %
V h min s %
Basic documentation LMV37.4...
23 Operation of LMV37.4 via the AZL2
LMV37.4 is in standby mode.
Note!
OFF flashes when the Manual OFF function, the
output, or load controller OFF is activated.
The LMV37.4 is in phase 22. The
heat. The bar below the
program phases and controlled components are displayed
in accordance with the program sequence.
The LMV37.4 is in phase 30 and shows the remaining
running time in that phase.
Example: 12 s, phase 30
manual
load
controller calls for
symbol appears. The individual
CC1P7546en
17.12.2018