Download Print this page

Ducati sport 100 2006 Owner's Manual page 112

Advertisement

sezione / section
D 5
A
B
C
D
E
F
G
H
L
F
M
N
F
P
48
Uso e manutenzione
Use and Maintenance operations
Sullo strumento DDS (1) selezionare la
funzione "Modulo misure", premendo
sull'icona "Modulo misure";
poi premere l'icona "Compressione
Cilindri" (D) e di seguito l'icona di
"Start" (E).
Nella schermata viene indicata con
una lettera maiuscola quale presa
utilizzare del cavo (Modulo Misure) (3):
A, B oppure C.
D
Far girare il motore con il motorino
avviamento fino al punto in cui la
pressione non aumenta più.
Controllare la pressione in ogni
cilindro:
- valore standard:
11÷12 bar;
- valore minimo:
E
10 bar;
- differenza massima accettabile tra i
cilindri: 2 bar.
Un valore di pressione eccessivo
può essere causato da:
- incrostazioni presenti nella camera
di combustione.
Un valore di pressione troppo
basso può essere causato da:
- perdite di gas tra testa e cilindro;
- sedi valvola usurate;
- steli valvola distorti;
- gioco valvole scorretto;
- cilindro o segmenti usurati.
Rimontare la candela su cui si è
operato e posizionare i cavi bobina-
candela (F) nelle rispettive sedi.
On the DDS tester (1), select the
"Measurement module" function by
pressing the corresponding icon; then
press the "Cylinder Compression"
icon (D) followed by the "Start"
icon (E).
The socket to which the cable
(Measurement Module) (3) is to be
connected is indicated on the screen
with a capital letter: A, B or C.
Turn over the engine with the starter
motor until the pressure stops rising.
Check the pressure in each cylinder:
- standard value:
11 to 12 bar;
- minimum value:
10 bar;
- maximum permissible difference
between cylinders: 2 bar.
An excessively high pressure value
can be caused by:
- build up of deposits in the
combustion chamber.
An excessively low pressure value
can be caused by:
- gas escaping between the cylinder
head and the cylinder;
- worn valve seats;
- bent valve stems;
- incorrect valve clearances;
- worn cylinder or piston rings.
Refit the spark plug and replace the
caps (F) on the respective spark plugs.
Sport 1000
- M.Y. 2006 - edizione/edition 00

Advertisement

loading