Chapter 3
| Basic Management Tasks
Setting the System Clock
◆
Authentication Key – Specifies the number of the key in the NTP
Authentication Key List to use for authentication with the configured server.
NTP authentication is optional. If enabled on the System > Time (Configure
General) page, you must also configure at least one key on the System > Time
(Add NTP Authentication Key) page. (Range: 1-65535)
Web Interface
To add an NTP time server to the server list:
1.
Click System, then Time.
2.
Select Configure Time Server from the Step list.
3.
Select Add NTP Server from the Action list.
4.
Enter the IP address of an NTP time server, and specify the index of the
authentication key if authentication is required.
5.
Click Apply.
Figure 17: Adding an NTP Time Server
To show the list of configured NTP time servers:
1.
Click System, then Time.
2.
Select Configure Time Server from the Step list.
3.
Select Show NTP Server from the Action list.
Figure 18: Showing the NTP Time Server List
– 80 –