Download
Share
Print this page
LevelOne GEL-2060 Configuration Commands
  1. Manuals
  2. Brands
  3. LevelOne Manuals
  4. Switch
  5. GEL-2060
  6. Configuration commands
LevelOne GEL-2060 Configuration Commands

LevelOne GEL-2060 Configuration Commands

Anti-attack configuration commands
Hide thumbs Also See for GEL-2060:

Advertisement

Quick Links

Download this manual
GEL-2060
Anti-Attack Configuration Commands

Advertisement

loading

Related Manuals for LevelOne GEL-2060

Summary of Contents for LevelOne GEL-2060

  • Page 1 GEL-2060 Anti-Attack Configuration Commands...

  • Page 2: Table Of Contents

    Table of Contents Table of Contents Chapter 1 Anti-Attack Configuration Commands ........................1 1.1 Anti-Attack Configuration Commands........................1 1.1.1 filter period time ............................1 1.1.2 filter threshold value ..........................1 1.1.3 filter block-time value ..........................2 1.1.4 filter igmp ..............................3 1.1.5 filter arp ..............................

  • Page 3: Chapter 1 Anti-Attack Configuration Commands

    Anti-Attack Configuration Commands Chapter 1 Anti-Attack Configuration Commands 1.1 Anti-Attack Configuration Commands 1.1.1 filter period time To configure filter period for attack, use the filter period command. parameter parameter Description time The filter period for attack in seconds. It is considered as attack when the attack source sends packets above the specified number in any filter period time.

  • Page 4: Filter Block-Time Value

    Anti-Attack Configuration Commands default 1000 command mode global configuration mode example Switch_config#filter threshold 1500 Related commands filter period time 1.1.3 filter block-time value To configure the time to block attack resource, use the filter block-time value command. parameter parameter description Value Time to block attack source in seconds.

  • Page 5: Filter Igmp

    Anti-Attack Configuration Commands 1.1.4 filter igmp To filter IGMP attack, use the filter igmp command. parameter none Command mode Global configuration mode example Switch_config#filter igmp Related commands filter enable 1.1.5 filter arp To fliter ARP attack, use the filter arp command. parameter none Command mode...

  • Page 6: Show Filter

    Anti-Attack Configuration Commands parameter none Command mode Global configuration mode example Switch_config#filter enable Related commands filter igmp filter arp 1.1.7 show filter To display working state of the anti-attack feature of the current switch, use the show filter command. parameter none command mode non-user mode...