Table 23: System Capabilities - LevelOne GEL-1061 User Manual

Chapter 13
| Basic Administration Protocols
Link Layer Discovery Protocol
◆
Chassis ID – An octet string indicating the specific identifier for the particular
chassis in this system.
◆
System Name – A string that indicates the system's administratively assigned
name (see "Displaying System Information" on page
◆
System Description – A textual description of the network entity. This field is
also displayed by the show system command.
◆
System Capabilities Supported – The capabilities that define the primary
function(s) of the system.

Table 23: System Capabilities

ID Basis
Other
Repeater
Bridge
WLAN Access Point
Router
Telephone
DOCSIS cable device
End Station Only
◆
System Capabilities Enabled – The primary function(s) of the system which
are currently enabled. Refer to the preceding table.
◆
Management Address – The management address associated with the local
system. If no management address is available, the address should be the MAC
address for the CPU or for the port sending this advertisement.
Interface Settings
The attributes listed below apply to both port and trunk interface types. When a
trunk is listed, the descriptions apply to the first port of the trunk.
◆
Port/Trunk Description – A string that indicates the port or trunk description.
If RFC 2863 is implemented, the ifDescr object should be used for this field.
◆
Port/Trunk ID – A string that contains the specific identifier for the port or
trunk from which this LLDPDU was transmitted.
Interface Details
The attributes listed below apply to both port and trunk interface types. When a
trunk is listed, the descriptions apply to the first port of the trunk.
◆
Local Port/Trunk – Local interface on this switch.
Reference
—
IETF RFC 2108
IETF RFC 2674
IEEE 802.11 MIB
IETF RFC 1812
IETF RFC 2011
IETF RFC 2669 and IETF RFC 2670
IETF RFC 2011
– 330 –
62).