Displaying The Arp Inspection Log; Figure 182: Displaying Statistics For Arp Inspection; Table 18: Arp Inspection Log - LevelOne GEL-1061 User Manual

Chapter 12
| Security Measures
ARP Inspection
Displaying the
ARP Inspection Log

Figure 182: Displaying Statistics for ARP Inspection

Use the Security > ARP Inspection (Show Information - Show Log) page to show
information about entries stored in the log, including the associated VLAN, port,
and address components.
Parameters
These parameters are displayed:

Table 18: ARP Inspection Log

Parameter
VLAN ID
Port
Src. IP Address
Dst. IP Address
Src. MAC Address
Dst. MAC Address
Web Interface
To display the ARP Inspection log:
1.
Click Security, ARP Inspection.
2.
Select Show Information from the Step list.
3.
Select Show Log from the Action list.
Description
The VLAN where this packet was seen.
The port where this packet was seen.
The source IP address in the packet.
The destination IP address in the packet.
The source MAC address in the packet.
The destination MAC address in the packet.
– 286 –