Showing Snmp Statistics; Figure 239: Creating Snmp Notification Logs; Figure 240: Showing Snmp Notification Logs - LevelOne GEL-1061 User Manual

Chapter 13
| Basic Administration Protocols
Simple Network Management Protocol
Showing
SNMP Statistics

Figure 239: Creating SNMP Notification Logs

To show configured SNMP notification logs:
1.
Click Administration, SNMP.
2.
Select Configure Notify Filter from the Step list.
3.
Select Show from the Action list.

Figure 240: Showing SNMP Notification Logs

Use the Administration > SNMP (Show Statistics) page to show counters for SNMP
input and output protocol data units.
Parameters
The following counters are displayed:
◆
SNMP packets input – The total number of messages delivered to the SNMP
entity from the transport service.
◆
Bad SNMP version errors – The total number of SNMP messages which were
delivered to the SNMP entity and were for an unsupported SNMP version.
◆
Unknown community name – The total number of SNMP messages delivered
to the SNMP entity which used a SNMP community name not known to said
entity.
◆
Illegal operation for community name supplied – The total number of SNMP
messages delivered to the SNMP entity which represented an SNMP operation
which was not allowed by the SNMP community named in the message.
– 374 –