Figure 124: Showing Class Maps - LevelOne GEL-1061 User Manual

Chapter 10
| Quality of Service
Configuring a Class Map
To show the configured class maps:
1.
Click Traffic, DiffServ.
2.
Select Configure Class from the Step list.
3.
Select Show from the Action list.

Figure 124: Showing Class Maps

To edit the rules for a class map:
1.
Click Traffic, DiffServ.
2.
Select Configure Class from the Step list.
3.
Select Add Rule from the Action list.
4.
Select the name of a class map.
5.
Specify type of traffic for this class based on an access list, DSCP or IP
Precedence value, VLAN, or CoS value. You can specify up to 16 items to match
when assigning ingress traffic to a class map.
6.
Click Apply.
– 208 –