Security Measures - LevelOne GEL-1061 User Manual

12

Security Measures

You can configure this switch to authenticate users logging into the system for
management access using local or remote authentication methods. Port-based
authentication using IEEE 802.1X can also be configured to control either
management access to the uplink ports or client access to the data ports. This
switch provides secure network management access using the following options:
◆
AAA – Use local or remote authentication to configure access rights, specify
authentication servers, configure remote authentication and accounting.
◆
User Accounts – Manually configure access rights on the switch for specified
users.
◆
Network Access - Configure MAC authentication, intrusion response, dynamic
VLAN assignment, and dynamic QoS assignment.
◆
HTTPS – Provide a secure web connection.
◆
SSH – Provide a secure shell (for secure Telnet access).
◆
ACL – Access Control Lists provide packet filtering for IP frames (based on
address, protocol, Layer 4 protocol port number or TCP control code).
◆
ARP Inspection – Security feature that validates the MAC Address bindings for
Address Resolution Protocol packets. Provides protection against ARP traffic
with invalid MAC to IP Address bindings, which forms the basis for certain
"man-in-the-middle" attacks.
◆
IP Filter – Filters management access to the web, SNMP or Telnet interface.
◆
Port Security – Configure secure addresses for individual ports.
◆
Port Authentication
specific ports.
◆
DHCP Snooping – Filter IP traffic on insecure ports for which the source address
cannot be identified via DHCP snooping.
◆
DoS Protection – Protects against Denial-of-Service attacks.
◆
IPv4 Source Guard – Filters IPv4 traffic on insecure ports for which the source
address cannot be identified via DHCPv4 snooping nor static source bindings.
– Use IEEE 802.1X port authentication to control access to
– 223 –