Binding a Port to an
Access Control List
Figure 176: Configuring a ARP ACL
After configuring ACLs, use the Security > ACL (Configure Interface – Configure)
page to bind the ports that need to filter traffic to the appropriate ACLs.
Parameters
These parameters are displayed:
◆
Type – Selects the type of ACLs to bind to a port.
◆
Port – Port identifier. {Range: 1-10/28}
◆
ACL – ACL used for ingress packets.
◆
Time Range – Name of a time range.
◆
Counter – Enables counter for ACL statistics.
Web Interface
To bind an ACL to a port:
1.
Click Security, ACL.
2.
Select Configure Interface from the Step list.
3.
Select Configure from the Action list.
4.
Select IP, MAC or IPv6 from the Type options.
5.
Select a port.
– 277 –
Chapter 12
| Security Measures
Access Control Lists