Setting A Time Range - LevelOne GEL-1061 User Manual

Setting a Time Range

Use the Administration > Time Range page to set a time range during which
various functions are applied, including applied ACLs or PoE.
Command Usage
◆
If both an absolute rule and one or more periodic rules are configured for the
same time range (i.e., named entry), that entry will only take effect if the current
time is within the absolute time range and one of the periodic time ranges.
◆
A maximum of eight rules can be configured for a time range.
Parameters
These parameters are displayed:
Add
◆
Time-Range Name – Name of a time range. (Range: 1-32 characters)
Add Rule
◆
Time-Range – Name of a time range.
◆
Mode
Absolute – Specifies a specific time or time range.
■
Start/End – Specifies the hours, minutes, month, day, and year at which
■
to start or end.
Periodic – Specifies a periodic interval.
■
Start/To – Specifies the days of the week, hours, and minutes at which
■
to start or end.
Chapter 13
– 387 –
| Basic Administration Protocols
Setting a Time Range