Table of Contents
Advertisement
4-12
TFTP Server IP Address
If you want to download system software from a TFTP server, enter the
TFTP server IP address in this field.
Network Configuration
Use the tab key to highlight IP Address listed under the heading New. Enter
the IP address for the switch. Repeat this step for the Subnet Mask and
Default Gateway. Select the SAVE command and press Enter to save your
configuration settings.
Boot ROM Code Download
If you want to request a boot ROM code download for the Switch, place an X
in the check box and enter the path for the file in this field.
System Software & Web Pages Database
Download
If you want to request a system software and web page database download
for the Switch, place an X in the check box and enter the path for the file in
this field.
POST Commands
The following describes the command options that are available at the bottom
of the POST Download Menu screen.
• SYSTEM Closes the POST Download Menu and executes the system
runtime software without performing any configuration changes or
software downloads.
• CONTINUE Executes a software download without rebooting. Note
that Network Configuration changes will not be configured.
Setting-Up for Console Management
Advertisement
Table of Contents
