LevelOne GEL-1061 User Manual page 356

Chapter 13
| Basic Administration Protocols
Simple Network Management Protocol
◆
Security Level – The following security levels are only used for the groups
assigned to the SNMP security model:
noAuthNoPriv – There is no authentication or encryption used in SNMP
■
communications. (This is the default security level.)
AuthNoPriv – SNMP communications use authentication, but the data is
■
not encrypted.
AuthPriv – SNMP communications use both authentication and
■
encryption.
◆
Read View – The configured view for read access. (Range: 1-32 characters)
◆
Write View – The configured view for write access. (Range: 1-32 characters)
◆
Notify View – The configured view for notifications. (Range: 1-32 characters)
– 356 –