Chapter 13
| Basic Administration Protocols
Setting a Time Range
Web Interface
To configure a time range:
1.
Click Administration, Time Range.
2.
Select Add from the Action list.
3.
Enter the name of a time range.
4.
Click Apply.
Figure 252: Setting the Name of a Time Range
To show a list of time ranges:
1.
Click Administration, Time Range.
2.
Select Show from the Action list.
Figure 253: Showing a List of Time Ranges
To configure a rule for a time range:
1.
Click Administration, Time Range.
2.
Select Add Rule from the Action list.
3.
Select the name of time range from the drop-down list.
4.
Select a mode option of Absolute or Periodic.
5.
Fill in the required parameters for the selected mode.
6.
Click Apply.
– 388 –