LevelOne GEL-1061 User Manual page 126

Chapter 4
| Interface Configuration
Trunk Configuration
different hosts. Do not use this mode for switch-to-server trunk links where
the destination IP address is the same for all traffic.
Destination MAC Address: All traffic with the same destination MAC
■
address is output on the same link in a trunk. This mode works best for
switch-to-switch trunk links where traffic through the switch is destined for
many different hosts. Do not use this mode for switch-to-router trunk links
where the destination MAC address is the same for all traffic.
Source and Destination IP Address: All traffic with the same source and
■
destination IP address is output on the same link in a trunk. This mode
works best for switch-to-router trunk links where traffic through the switch
is received from and destined for many different hosts.
Source and Destination MAC Address: All traffic with the same source
■
and destination MAC address is output on the same link in a trunk. This
mode works best for switch-to-switch trunk links where traffic through the
switch is received from and destined for many different hosts.
Source IP Address: All traffic with the same source IP address is output on
■
the same link in a trunk. This mode works best for switch-to-router or
switch-to-server trunk links where traffic through the switch is received
from many different hosts.
Source MAC Address: All traffic with the same source MAC address is
■
output on the same link in a trunk. This mode works best for switch-to-
switch trunk links where traffic through the switch is received from many
different hosts.
Parameters
These parameters are displayed for the load balance mode:
◆
Destination IP Address - Load balancing based on destination IP address.
◆
Destination MAC Address - Load balancing based on destination MAC
address.
◆
Source and Destination IP Address - Load balancing based on source and
destination IP address.
◆
Source and Destination MAC Address - Load balancing based on source and
destination MAC address.
◆
Source IP Address - Load balancing based on source IP address.
◆
Source MAC Address - Load balancing based on source MAC address.
Web Interface
To display the load-distribution method used by ports in aggregated links:
– 126 –