Chapter 4
| Interface Configuration
Configuring Remote Port Mirroring
Configuring Remote Port Mirroring
5.
Specify the traffic type to be mirrored.
6.
Click Apply.
Figure 62: Configuring Local Port Mirroring
To display the configured mirror sessions:
1.
Click Interface, Port, Mirror.
2.
Select Show from the Action List.
Figure 63: Displaying Local Port Mirror Sessions
Use the Interface > RSPAN page to mirror traffic from remote switches for analysis
at a destination port on the local switch. This feature, also called Remote Switched
Port Analyzer (RSPAN), carries traffic generated on the specified source ports for
each session over a user-specified VLAN dedicated to that RSPAN session in all
participating switches. Monitored traffic from one or more sources is copied onto
the RSPAN VLAN through IEEE 802.1Q trunk or hybrid ports that carry it to any
RSPAN destination port monitoring the RSPAN VLAN as shown in the figure below.
– 130 –