LevelOne GEL-1061 User Manual page 47

Table 4: Switch Main Menu
Menu
Time
Configure General
Manual
SNTP
NTP
Configure Time Server
Configure SNTP Server
Add NTP Server
Show NTP Server
Add NTP Authentication Key
Show NTP Authentication Key
Configure Time Zone
Configure Summer Time
Console
Telnet
CPU Utilization
CPU Guard
Memory Status
Reset
Interface
Port
General
Configure by Port List
Configure by Port Range
Show Information
Statistics
Chart
History
Transceiver
(Continued)
Description
Manually sets the current time
Configures SNTP polling interval
Configures NTP authentication parameters
Configures a list of SNTP servers
Sets the IP address for SNTP time servers
Adds NTP time server and index of authentication key
Shows list of configured NTP time servers
Adds key index and corresponding MD5 key
Shows list of configured authentication keys
Sets the local time zone for the system clock
Configures summer time settings
Sets console port connection parameters
Sets Telnet connection parameters
Displays information on CPU utilization
Sets the CPU utilization watermark and threshold
Shows memory utilization parameters
Restarts the switch immediately, at a specified time, after a specified
delay, or at a periodic interval
Configures connection settings per port
Configures connection settings for a range of ports
Displays port connection status
Shows Interface, Etherlike, and RMON port statistics
Shows Interface, Etherlike, and RMON port statistics
Shows statistical history for specified interfaces
Shows identifying information and operational parameters for optical
transceivers which support Digital Diagnostic Monitoring (DDM), and
configures thresholds for alarm and warning messages for optical
transceivers which support DDM
Chapter 2
– 47 –
| Using the Web Interface
Navigating the Web Browser Interface
Page
75
76
77
77
78
78
79
79
81
81
82
83
85
87
88
89
90
91
95
96
96
96
98
99
100
100
104
108
109