LevelOne GEL-1061 User Manual page 123

Table 8: LACP Internal Configuration Information
Parameter Description
Admin State, Administrative or operational values of the actor's state parameters:
Oper State
◆
◆
◆
◆
◆
◆
Admin State,
Oper State
(continued)
◆
◆
Web Interface
To display LACP settings and status for the local side:
1.
Click Interface, Trunk, Dynamic.
2.
Select Configure Aggregation Port from the Step list.
3.
Select Show Information from the Action list.
4.
Click Internal.
5.
Select a group member from the Port list.
Expired – The actor's receive machine is in the expired state;
Defaulted – The actor's receive machine is using defaulted operational
partner information, administratively configured for the partner.
Distributing – If false, distribution of outgoing frames on this link is
disabled; i.e., distribution is currently disabled and is not expected to
be enabled in the absence of administrative changes or changes in
received protocol information.
Collecting – Collection of incoming frames on this link is enabled; i.e.,
collection is currently enabled and is not expected to be disabled in the
absence of administrative changes or changes in received protocol
information.
Synchronization – The System considers this link to be IN_SYNC; i.e., it
has been allocated to the correct Link Aggregation Group, the group
has been associated with a compatible Aggregator, and the identity of
the Link Aggregation Group is consistent with the System ID and
operational Key information transmitted.
Aggregation – The system considers this link to be aggregatable; i.e., a
potential candidate for aggregation.
Long timeout – Periodic transmission of LACPDUs uses a slow
transmission rate.
LACP-Activity – Activity control value with regard to this link.
(0: Passive; 1: Active)
– 123 –
Chapter 4
| Interface Configuration
Trunk Configuration
(Continued)