Showing Port Or Trunk Statistics; Figure 34: Displaying Port Information; Table 6: Port Statistics - LevelOne GEL-1061 User Manual

Chapter 4
| Interface Configuration
Port Configuration
Showing Port or Trunk
Statistics
Web Interface
To display port connection parameters:
1.
Click Interface, Port, General.
2.
Select Show Information from the Action List.

Figure 34: Displaying Port Information

Use the Interface > Port/Trunk > Statistics or Chart page to display standard
statistics on network traffic from the Interfaces Group and Ethernet-like MIBs, as
well as a detailed breakdown of traffic based on the RMON MIB. Interfaces and
Ethernet-like statistics display errors on the traffic passing through each port. This
information can be used to identify potential problems with the switch (such as a
faulty port or unusually heavy loading). RMON statistics provide access to a broad
range of statistics, including a total count of different frame types and sizes passing
through each port. All values displayed have been accumulated since the last
system reboot, and are shown as counts per second. Statistics are refreshed every
60 seconds by default.
Note: RMON groups 2, 3 and 9 can only be accessed using SNMP management
software.
Parameters
These parameters are displayed:

Table 6: Port Statistics

Parameter
Interface Statistics
Received Octets
Transmitted Octets
Description
The total number of octets received on the interface, including framing
characters.
The total number of octets transmitted out of the interface, including
framing characters.
– 100 –