Figure 51: Enabling Lacp On A Port - LevelOne GEL-1061 User Manual

To enable LACP for a port:
1.
Click Interface, Trunk, Dynamic.
2.
Select Configure Aggregation Port from the Step list.
3.
Select Configure from the Action list.
4.
Click General.
5.
Enable LACP on the required ports.
6.
Click Apply.

Figure 51: Enabling LACP on a Port

To configure LACP parameters for group members:
1.
Click Interface, Trunk, Dynamic.
2.
Select Configure Aggregation Port from the Step list.
3.
Select Configure from the Action list.
4.
Click Actor or Partner.
5.
Configure the required settings.
6.
Click Apply.
– 119 –
Chapter 4
| Interface Configuration
Trunk Configuration