Configuring Static Dns Host To Address Entries; Figure 293: Configuring A List Of Name Servers For Dns; Figure 294: Showing The List Of Name Servers For Dns - LevelOne GEL-1061 User Manual

Figure 293: Configuring a List of Name Servers for DNS

To show the list name servers:
1.
2.

Figure 294: Showing the List of Name Servers for DNS

Configuring
Use the IP Service > DNS - Static Host Table (Add) page to manually configure static
Static DNS Host entries in the DNS table that are used to map domain names to IP addresses.
to Address Entries
Command Usage
◆
Parameters
These parameters are displayed:
◆
◆
Click IP Service, DNS.
Select Show Name Servers from the Action list.
Static entries may be used for local devices connected directly to the attached
network, or for commonly used resources located elsewhere on the network.
Host Name – Name of a host device that is mapped to one or more IP
addresses. (Range: 1-127 characters)
IP Address – IPv4 or IPv6 address(es) associated with a host name.
– 441 –
Chapter 16
| IP Services
Domain Name Service