Interface Configuration - LevelOne GEL-1061 User Manual

4

Interface Configuration

This chapter describes the following topics:
◆
Port Configuration – Configures connection settings, including auto-
negotiation, or manual setting of speed, duplex mode, and flow control.
◆
Displaying Statistics
table or chart form.
◆
Displaying Statistical History
interfaces.
◆
Displaying Transceiver Data
parameters for optical transceivers which support DDM.
◆
Configuring Transceiver Thresholds
warning messages for optical transceivers which support DDM.
◆
Trunk Configuration
◆
Saving Power – Adjusts the power provided to ports based on the length of the
cable used to connect to other devices.
◆
Local Port Mirroring
switch.
◆
Remote Port Mirroring
for analysis at a destination port on the local switch.
◆
Traffic Segmentation
group of ports.Port Configuration
– Shows Interface, Etherlike, and RMON port statistics in
– Displays statistical history for the specified
– Displays identifying information, and operational
– Configures thresholds for alarm and
– Configures static or dynamic trunks.
– Sets the source and target ports for mirroring on the local
– Configures mirroring of traffic from remote switches
– Configures the uplinks and down links to a segmented
– 95 –