Chapter 13
| Basic Administration Protocols
Simple Network Management Protocol
Figure 222: Creating an SNMP View
To show the SNMP views of the switch's MIB database:
1.
Click Administration, SNMP.
2.
Select Configure View from the Step list.
3.
Select Show View from the Action list.
Figure 223: Showing SNMP Views
To add an object identifier to an existing SNMP view of the switch's MIB database:
1.
Click Administration, SNMP.
2.
Select Configure View from the Step list.
3.
Select Add OID Subtree from the Action list.
4.
Select a view name from the list of existing views, and specify an additional OID
subtree in the switch's MIB database to be included or excluded in the view.
5.
Click Apply
– 354 –