System Defaults; Table 2: System Defaults - LevelOne GEL-1061 User Manual

System Defaults

The switch's system defaults are provided in the configuration file
"Factory_Default_Config.cfg." To reset the switch defaults, this file should be set as
the startup configuration file.
The following table lists some of the basic system defaults.

Table 2: System Defaults

Function
Console Port Connection
Authentication and
Security Measures
Web Management
Parameter
Baud Rate
Data bits
Stop bits
Parity
Local Console Timeout
Privileged Exec Level
Normal Exec Level
Enable Privileged Exec from
Normal Exec Level
RADIUS Authentication
TACACS+ Authentication
802.1X Port Authentication
MAC Authentication
HTTPS
SSH
Port Security
IP Filtering
DHCP Snooping
IP Source Guard
HTTP Server
HTTP Port Number
HTTP Secure Server
HTTP Secure Server Port
– 35 –
Chapter 1
| Introduction
System Defaults
Default
115200 bps
8
1
none
600 seconds
Username "admin"
Password "admin"
Username "guest"
Password "guest"
Password "super"
Disabled
Disabled
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled (all ports)
Enabled
80
Enabled
443