Chapter 12
| Security Measures
Access Control Lists
Showing ACL
Hardware Counters
6.
Select the name of an ACL from the ACL list.
7.
Click Apply.
Figure 177: Binding a Port to an ACL
Use the Security > ACL > Configure Interface (Show Hardware Counters) page to
show statistics for ACL hardware counters.
Parameters
These parameters are displayed:
◆
Port – Port identifier. (Range: 1-10/28)
◆
Type – Selects the type of ACL.
◆
Direction – Displays statistics for ingress or egress traffic.
◆
Query – Displays statistics for selected criteria.
◆
ACL Name – The ACL bound this port.
◆
Action – Shows if action is to permit or deny specified packets.
◆
Rules – Shows the rules for the ACL bound to this port.
◆
Time-Range – Name of a time range.
◆
Hit – Shows the number of packets matching this ACL.
◆
Clear Counter – Clears the hit counter for the specified ACL.
– 278 –