Angle Measurement - Leica TS01 User Manual

4.5.2
Access
Measure horizontal
and vertical angles
between two points
Set an angle
32
Measuring Mode
Distance Measurement
Coordinate Measurement

Angle Measurement

1. Power on to enter the standard survey interface.
2. Press button on the keyboard.
1. Align to the first target A.
2. Press Hz=0 to set the horizontal angle to 0°0'0''.
3. Press YES.
4. Align to the second target B to read the horizontal and vertical
angles between B and A.
By locking the angle
1. Rotate the angle by the horizontal drive.
2. Press Lock to fix the horinzontal angle.
3. Align to the target.
Softkey Description
VA/ZA Set vertical angle to Horizon = 0°.
Set vertical angle to Zenith = 0°.
Meas To execute a distance measure-
ment and store the displayed val-
ues.
To execute a distance measure-
Dist
ment.
Store To save the displayed values
without executing a distance
measurment.
EDM Enter EDM settings.
OffSet Enter offset function.
SetOut Enter Set Out app.
Meas To execute a distance measure-
ment and store the displayed val-
ues.
Dist To execute a distance measure-
ment.
Store To save the displayed values
without executing a distance
measurment.
EDM Enter EDM settings.
hr Enter target height.
hi Enter station height.
STN Enter station coordinates.
Backsight Enter the back-sight orientation
program
OffSet Enter offset function.
Operation