Targeting And Layout With Rm100 Remote Control - Leica 3D Disto User Manual

7.5.2
Description
Functionality of
the keys
3D Disto
, Software Applications

Targeting and Layout with RM100 Remote Control

The functionality of the RM100 Remote Control is like in standard measurement
during the whole projector application. The RM100 Remote Control only works if the
Control Unit is ON - otherwise measurement errors could not be displayed and
avoided.
Red key :
• Press to measure a point within the reference area. The 3D Disto searches
the closest grid point and projects it.
Short key press (<1sec.) on
• Each arrow key selects the neighbouring point, turns the 3D Disto and starts the
iterative measurement 1 second after key press.
• Several key presses on the same arrow key allow to skip neighbouring points. The
3D Disto starts to turn 1 second after the last key press.
/ / / :
145