7.5.2
Description
Functionality of
the keys in
Projector
application
3D Disto
, Software Applications
Targeting and Layout with RM100 Remote Control
The functionality of the RM100 Remote Control is the same as in the other applica-
tions. The RM100 Remote Control only works if the Control Unit is ON - otherwise
measurement errors cannot be displayed and avoided.
Red key
:
•
Press
to activate laser and a second time to project or measure a point within
the reference area.
Short key press on
•
Each arrow key selects the neighbouring point, turns the 3D Disto and starts the
iterative measurement. Press once to activate the remote control and a second
time to execute the command.
/
/
/
:
145