Targeting And Layout With Rm100 Remote Control; Location - Leica 3D Disto User Manual

Plane Switching
6.3.2
Functionality of the
keys in Projector
application
6.4
Description
Secure Location step-
by-step
66
Step Description
3. Laser point flashes if the exact position is found. Point is high-
lighted in red in sketch area. The result window displays the dis-
tance between point and reference plane.
4.
To layout further points select another point and press
5.
Press to save the file.
If a point can not be projected on the ceiling, just move the laser
☞
beam onto the floor before pressing the DIST key. Following points
will be projected on the floor from now on. The projection surface
can be changed at any time.

Targeting and Layout with RM100 Remote Control

Press
measure a point within the reference area.
Each arrow key selects the neighbouring point, turns the 3D
Disto and starts the iterative measurement. Press once to
activate the remote control and a second time to execute the
command.

Location

The Location functions allow to change the position of the 3D Disto.
Secure Points are placed by the user and make the positioning procedure
easy.
Step Description
☞ You have to measure two points first before Secure Points can be
saved.
1. Label and affix three to five self-adhesive target marks on walls,
ceiling or floor around your working area. Ensure that the target
marks are spread out.
2. Press Menu » Applications » Location » Secure Location.
Pointfinder opens.
to activate laser and a second time to project or
.
Software Applications