Table of Contents
Advertisement
780C Multi-Interface Interoperability Tester – User Guide
5. If you wish to obtain an EDID from an HDMI or HDBaseT sink device that you have on hand, connect the
780C HDMI or HDBaseT OUT port to the HDMI/HDBaseT input of that sink device. This configuration is
depicted below.
Skip to Step 8 if you do not want to use an EDID from an HDMI/HDBaseT sink device you have on hand.
6. Navigate to the EDID Test from the Sink Tests menu shown below.
September 29, 2014
Page 130
Revision A1
Advertisement
Table of Contents
Need help?
Do you have a question about the 780C and is the answer not in the manual?